Solar Direct is dedicated to increasing our customer's awareness of
sustainable and renewable technology by providing an educational, yet highly engaging internet venue,
where they can discover how green alternatives can impact not only their lives, but the world future
generations will inherit! Click here first to
begin your sustainable living learning adventure! Learn the step-by-step details of how and why sustainable
and renewable technology works, and the science behind the functioning of each alternative energy process. Solar Direct offers unsurpassed, highly-personalized
product selection assistance, with experienced professionals providing toll free support -
creating a truly inspired purchasing experience for our customers. Click here next to start
the selection process, then use online tools to decide your proper type of technology and its matching product.
Product Selection Assistants are standing by to help you with toll free support. Solar Direct hosts the Energy
SuperMarket website, the Internet's top-ranked shopping destination for renewable energy technology. Enjoy
a secure shopping for all your alternative energy needs. Solar Direct offers thousands of green, sustainable
and renewable products, combined with toll free Product Selection Assistants dedicated to providing a quality
purchasing experience for all consumers. Click here
last to finish your alternative energy adventure! The Energy SuperMarket website provides the
most advanced, real world authoritative, user-friendly shopping destination for renewable energy
technology today.

PowerFilm

Rollable Solar Powered Battery Charger

PowerFilm Solar Charger

PowerFilm® Rollable Solar Powered Battery Chargers
Ready to use, portable and remote power 5, 10 and 20 watts range.

The World's Most Rollable and Light weight Solar Technology!

Because PowerFilm® Integrated Solar Panels (thin film on plastic) are developed and manufactured with a proprietary roll-to-roll process, by Iowa Thin Film Technologies, they are truly rollable unlike other thin film technologies that are only somewhat flexible.

PowerFilm® solar panels are monolithically integrated which eliminates the need for damage-prone manual connections of individual solar cells. It is made of silicon, a natural resource in abundant supply. PowerFilm® performs well in diverse environments, including hot sun, and does not suffer from wasted over-voltage.


PowerFilm Solar Charger

Product Applications

  • Charge or Direct Power 12 Volt Systems
  • Charge Wireless Electronics
  • Charge almost all Lithium, NiCad, or NiMH Batteries

PowerFilm Solar ChargerCharge or Direct Power 12V Systems

  • Marine, RV, Car Battery
  • Filed Communication
  • Radios
  • Heavy Equipment
  • Golf Carts
  • Military Vehicles
  • Lighting
  • Security Systems

12V system + PowerFilm (Optional: RA1 Accessory 12V Cigarette Lighter Adapter)

PowerFilm Solar ChargerCharge Wireless Electronics

  • Laptop
  • Cell Phone
  • iPhone
  • iPod
  • mp3 Player
  • PDA
  • Sony PSP
  • Nintendo DS
  • GPS
  • Satellite Phone
  • Internal Batteries


Your wireless electronic + Your 12V Cigarette Lighter Adapter for wireless electronic + RA2 Accessory 12V Female Cigarette Lighter Adapter + PowerFilm

PowerFilm Solar ChargerRecharge Batteries

  • GameBoy
  • Cameras
  • Camcorders
  • Boomboxes
  • Camping lanterns

 

Your Lithium Ion, Lithium Polymer, NiCad or NiMH Batteries +
RA3 Accessory: 12 Volt Trickle Charger Pack for AA and AAA or
RA4 Accessory: 12 Volt Standard Battery Charger Pack or
RA5 Accessory: 12 Volt Deluxe Universal Battery Charger/Analyser/Conditioner +
RA2 Accessory: 12V Female Cigarette Lighter Adapter + PowerFilm

See Operating Instructions for specific details

power filmCore System Includes:

PowerFilm Rollable Solar Panel with junction box and reverse blocking diode

15 feet of wire with o-ring battery connectors

Available in 3 sizes

Back To Top

PowerFilm Solar Charger

Product Features

  • Durable construction with marine-grade components
  • Can roll around a 3-inch diameter
  • UV Resistant / Weatherproof
  • Junction box with reverse blocking diode
  • Tin-coated wire for added durability
  • Wrap-around fastener to keep rolled  up
  • Performs well in diverse conditions, including hot and cloudy environments
  • Cadmium free
PowerFilm Solar Charger

Product Specifications


Specifications* PowerFilm®
R15- 300
PowerFilm®
R15- 600
PowerFilm®
R15- 1200
Operating Voltage [V] 15.4 15.4 15.4
Operating Current [Amps] .3 .6 1.2
Weight [lbs./kg] 0.6/.29 1/.46 1 .9/.88
Dimensions [inch/mm] 11.5 x 21
292 x 531
11.5 x 38
292 x 972
12 x 73
305 x 1858
Rolled Dimensions [inch/mm] 11.5x4x3.75
292x101.5x95.25
11.5x4.25x4.25
292x108x108
12x4.25x4.5
305x108x114.3

PowerFilm Solar Charger
*Operating Voltage and Operating Current at AM1.5. Power performance may vary +/- 10% due to temperature variation, spectral variation, and related effects.


Model R15-300
shown on left with accessories: RA3 12volt Trickle Charger Pack and RA2 12volt female cigarette lighter adapter

Back To Top

PowerFilm Solar Charger

Frequently Asked Questions

How do I know which size I need?
Consult the Application Charge Time Table.

How do I know if it is working?
You can check the PowerFilm® Rollable Battery Charger with a voltmeter.

Will this product drain my battery at night?
No. It has a built-in blocking diode to protect against reverse draining of current.

Can I leave it outside permanently?
The PowerFilm® Rollable Battery Charger can be left outside permanently if maintained properly. It must be properly secured to avoid damage from high winds. Terminals should be kept clean and firmly connected.

What if the product gets wet?
No problem. The product is waterproof.

What if the product goes under water?
Simply wipe the product with a dry cloth and allow the product to dry before use. Avoid having the product completely submerged for an extended period of time.

Can I leave it outside in freezing temperatures?
Yes.

If I need more power can I connect several of these together? How?
Yes, it is acceptable to connect several PowerFilm® Rollable Battery Chargers in parallel.  Connect using the PowerFilm® Rollable Daisy Chain Accessory* (RA-6). Connect chargers up to a combined output of 20 Amps.

Can I use an extension cord?
You can use the 15 ft. Extension Cord accessory (RA-7) complete with matching marine-grade connectors. Total cord length greater than 30 feet likely will result in reduced power output.

Do I need to disconnect this charger when I start my vehicle or when I recharge the battery with an auxiliary power source?
You do not need to disconnect the rollable solar panel. You need to disconnect any battery charger pack accessory that is connected to the solar panel.

Do I need a charge controller?
A charge controller is used to prevent overcharging. As a general recommendation, a charge controller should be used if the current output of the solar panel, in Amps, is more than 1% of the battery capacity, in Amp-hours. For example, a charge controller would be recommended if the R15-1200 (with 1.2 Amps) were connected to a battery that is less than 120 Amp-hours. Consult the battery manufacturer for complete battery information and recommendations.

How do I clean the product?
Use a damp cloth with a mild soap solution.

Back To Top

PowerFilm Solar Charger

Solar Powered Battery Charger Technology

Integrated Technology Package
Because PowerFilm® integrated solar panels (thin film on plastic) are developed and manufactured with a proprietary roll process, by Iowa Thin Film Technologies, they are truly rollable unlike other thin film technologies that are only somewhat flexible. PowerFilm® solar panels are all monolithically integrated which eliminates the need for damage-prone manual connections of individual solar cells. PowerFilm® is made of silicon, a natural resource in abundant supply. PowerFilm® is Cadmium Free, unlike some other solar technologies, and performs well in diverse environments, including hot sun, and does not suffer from wasted over-voltage.

Ultra Rollable
PowerFilm® products are ultra rollable because they are manufactured on a roll up to 2400 feet long, using the proprietary roll-to-roll manufacturing technology platform of Iowa Thin Film Technologies. Iowa Thin Film Technologies is the first and only company in the world selling solar products manufactured on a true roll-to-roll process using a plastic substrate.

Durable
PowerFilm® products are monolithically integrated which eliminates the need for damage-prone manual connections of individual solar cells. PowerFilm® products are constructed using a durable polymer (plastic) substrate.

Easily Integrated
Several features enable easy integration: Paper thin low profile; Ultra flexibility allows conformity to shapes; Complete product design eliminates need for unsightly bolt-on frames.

Fabric Integrated
Integrated with a fabric backing for enhanced product functionality.

Lightweight
Constructed using a proprietary combination of thin and lightweight materials.

Environmentally Friendly Profile
Cadmium Free! (Other solar technologies such as CIS, CIGS, and CdTe contain cadmium which is considered an extremely toxic metal by the Department of Labor.) If comparing products, check to be sure they are Cadmium Free. Primary element used in PowerFilm® is silicon, a natural resource in abundant supply.

Back To Top

PowerFilm Solar Charger

Product Warranty

  • 3 Year Manufacturer's Warranty

PowerFilm® Rollable Series Limited Warranty
Iowa Thin Film Technologies, Inc. warrants to the original purchaser that PowerFilm® R15-300, R15-600, and R15-1200 products are free from defects in materials and workmanship and to provide at least 80% of rated minimum power for a period of 3 years. Accessories are warranted to be free from defects in materials and workmanship
for a period of 1 year. The duration of the Limited Warranty is from the date of initial purchase from Iowa Thin Film Technologies (ITFT ). The foregoing warranty does not apply to any products which have been subject to misuse, unauthorized modifications, neglect, improper testing, attempts to repair, or by accident, fire or other hazard. ITFT’s sole obligation and liability for modules failing to comply with this warranty shall be, at ITFT’s choice, either to supply replacement products or to credit the amount due for such nonconforming products, provided that the warranty procedures have been followed. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT THE PRODUCTS ARE PROVIDED ON AN “AS IS” BASIS AND ITFT MAKES NO WARRANTY IN CONNECTION WITH THE SUBJECT MATTER OF THIS AGREEMENT AND HEREBY DISCLAIMS ANY AND ALL IMPLIED OR STATUTORY WARRANTIES, INCLUDING ALL IMPLIED WARRANTIES OF TITLE, NON-INFRINGEMENT, QUIET ENJOYMENT, ACCURACY OF DATA, MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR
PURPOSE REGARDING SUCH SUBJECT MATTER. To the extent that a
party may not, as a matter of applicable law, disclaim any implied
warranty, the scope and duration of such warranty shall be the
minimum permitted under such law.
No Warranty Pass-Through. ITFT grants no warranty pass-through
for any ITFT product. Customer shall not pass through to its
customers or any other third party the warranties made by ITFT and
will expressly indicate to its customers that they must look solely
to them (not ITFT ) in connection with any problems, warranty
claims or other matters arising in relation to the modules.

Product Manufacturer:  Iowa Thin Film Technologies

Back To Top

purchase online
 Product Info

Applications
Features
Specifications
Warranty
FAQ
Technology

 PDF Downloads

Operating Instructions
Charge Time Table
Detail Sheet
Brochure

  Solar Direct    
  Bringing Renewable Technology Down to Earth!   Copyright Notice
© 1986-2016 Solar Direct
All Rights Reserved