|
 The UNI-SOLAR modules are exceptionally durable. They are encapsulated in UV-stabilized polymers and framed with anodized aluminum.
The polymer encapsulation includes EVA and the fluoropolymer ETFE. A Galvalume® steel backing plate provides stiffness.
Bypass diodes are connected across each cell, allowing the modules to produce power even when partially shaded (exception: US-5).
The US-64 and US-32 have a weather resistant UNI-SOLAR junction box with knock-outs for customization by the customer. All other Unisolar modules have a potted pig tail with integral wiring. The cable is a 2-conductor 18 AWG with insulation rated at 158°F.
The UNI-SOLAR US-64 and US-32 modules are appropriate for all applications from simple single module requirements to larger grid connected applications. All other UNI-SOLAR US modules under 30 watts should not be connected in series.
Product Features
• Power Ratings From 5W - 64W
• Clear Anodized Aluminum Frame
• Assemble To Meet Virtually Any Load
• Virtually Unbreakable (No Glass)
• Shadow & High Heat Tolerant
• Delivers Up To 20% More Real Energy
Product Applications
• Battery Charging
• Off-Grid Solar Home Systems
• Water Pumping Or Desalination Systems
• Telecommunications
• Gate Opening Or Fence Charging
• Bus Or Animal Shelters
UNI-SOLAR framed modules are mounted on permanent, fixed position module racks that can be adjusted for optimum tilt, wind resistance and exposure to sunlight. These glass-free, lightweight, vandal resistant modules can be utilized in a wide variety of applications from fence charging to telecommunications.
The larger framed panels are often used as building blocks in photovoltaic arrays, which can be assembled to meet virtually any load from less than 100 watts to multi-megawatts.
Why Do UNI-SOLAR Products Outperform Others?
All solar panels are rated in terms of peak power output (watts). Outdoors, under normally higher operating temperatures, solar panel performance changes, depending on temperature, solar spectrum (light color) and related effects. UNI-SOLAR products are less affected by temperature than monocrystalline or polycrystalline solar
technology products. The result is up to 20% more delivered energy.*
*Source Solfest, “Module Shoot Out”
Quality Assurance, Proven Reliability
UNI-SOLAR modules comply with the following qualification tests:
• UL Listed Up To 600 VDC
• Safety Class II Up To 520 VDC (US-32 & US-64)
• Meets IEC 61646 Requirements
• Thermal Cycling
• Humidity-Freeze Test
• Damp Heat Test
• UV-Test
• Wet Insulation Test
• Mechanical Load Test
• Hail Impact Test
• Robustness of Terminations Test
Unisolar Framed Module 64W
Unisolar Framed Module 62W
|
