The AIR Marine is by far the world’s number one selling small wind turbine for Sailboats.
The AIR Marine incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.
The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.
Much Less Sound:
Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph [16 m/s]. AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.
Improved battery charging:
Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.
Product Applications:
• Sailboats and seaside locations
• Supplies power for refrigeration, auto-pilot, water maker,
• lights,
• navigational equipment, communication equipment.
• Designed to withstand hurricane force winds
• Can be installed on transom or deck in just a few hours
Product Features:
• Carbon fiber composite blades
• Aircraft quality aluminum alloy castings.
• Exclusive Brush-less neodymium based sealed alternator.
• Sophisticated internal battery charge regulator.
• Maintenance-free - only two moving parts.
• Exclusive Auto-brake feature slows the AIR-X to a silent
• spin when the batteries are charged, extending bearing
• life & eliminating noise
• Marine powder coating and stainless steel fittings for
• corrosion protection in a marine environment.
• High Wind Safe Mode - Automatically slows turbine in
• potentially damaging winds. Reduces noise and distractions
• for peace of-mind when on or off your boat.
Corrosion Resistance:
• Acid etched castings double coated with marine grade
• powder coat for
superior protection from the environment.
• Anodized hub.
• Tuff-Gel coated fasteners to prevent seizing of components.
• Tin plated wires.
• Sealed alternator.
OPTIONAL Tower Kits
• All stainless steel hardware with self-locking nuts
• Mast and stays are white powder-coated aluminum
• The 9' mast has an outside diameter of 1.9" also known as
• 1.5" schedule 40 pipe. The two 9' stays have an outside
• diameter of 1"
• Specially designed built-in vibration dampening mounts
• minimize noise transmission caused by wind generators
• Tilting mast base for easy installation
• Fully adjustable stay anchor base mounts
Mast and hardware kit sold separately
Product Warranty:
• 3 Year Warranty
Product Specifications:
• Rotor Diameter: 46" [1.15 meters]
• Weight: 13 lbs [5.85 kg]
• Mount: 1.5" [1.9" OD, 48 mm] SCHED 40 pipe
• Start up wind speed: 6 knots [7 mph, 2.7 m/s]
• Voltage: 12, 24, 48 VDC
• Rated Output: 400 watts at 24 knots [28 mph, 12.5 m/s] |