 |
Metlund DMAND S02T Components and Specifications
|
The component parts that make up the Metlund D'MAND System are the highest quality and reproduced by the largest manufacturers in the world. The pump, controller and zone valve are the finest quality available and are designed to operate 15 to 20 years as a D'MAND System. All of the Metlund components are designed with United States technology and manufactured in the United States.
MODEL S-02T Components:
- Metlund Controller
- Taco Model 0011 Pump
- Invensys Erie Valve
|
Metlund Electronic Controller (solid state)
|
Designed and developed by ACT, Inc. Metlund Systems; manufactured and quality control LED by EMS/Sandberg Industries in Santa Ana, California, a leading manufacturer of electronic circuit boards and electronic packaging. EMS/Sandberg Industries is a Fortune 500 company whose client list includes AT&T, Beckman Industries, IBM, Jet Propulsion Laboratories and NASA.
|
Taco Model 0011 High Velocity Circulator
|
The Taco 0011 high velocity/high head bronze circulator is designed for residential and light commercial systems.
The 0011 has the exclusive "00" cartridge design and ACB motor protector. The "00" cartridge contains all the moving parts; replacing it virtually rebuilds the circulator. The unique ACB anti-condensate baffle with ambient air-flow prevents the buildup of condensation on the motor windings when pumping chil LED water. It has a high head medium flow characteristic for applications in high pressure drop boilers, fan coil units, heat exchangers, large radiant heating systems and heat recovery units/earth loop systems.
The quiet, direct-drive high velocity series contains no mechanical seal and requires no maintenance. This compact design has low power consumption and is ideal for those high efficiency jobs that have space requirements. Because universal flange to flange length and orientations are featured, the 0011 may easily replace other models.
|
Taco Model 0011 High Velocity Pump
|
|
UL and CSA Listed
|
| ACB Baffle |
Non-ferrous |
| Casing |
Bronze |
| Impeller |
Non-Metallic |
| Shaft |
Ceramic |
| Bearings |
Carbon |
| Connections |
Flanged 3/4 inch |
| Life Expectancy |
15 Years |
| Performance |
Gallons/Minute=28
Total Head+30 ft. |
| Motor Type |
Permanent Split Capacitor |
| HP |
1/8 HP @ 3250 RPM |
| Electrical Charge |
1.76 Amp Rating
Impedance Protected |
| Pressure Rating |
125 PSI Max |
| Temp Rating |
230º F Max |
|
Invensys Hydronic Zone Valve- Model VT2213G13B220
|
This is a brass electronic modulating zone valve that controls the flow of hot water. Invensys is North America's largest supplier of residential automated systems.
Type: Full closing front and back
Rated: 300 PSI System pressure - 15,000 cycles 33ºF-200º temp.capability
Life Expectancy: 15 years
|
Metlund DMAND S02T Kit Configurations |
S-02T-PF
|
Patented DMAND Circuit Board
Pump with built in IFC valve
Flanges,
Two copper "T" compression fittings
Two stainless steel flex-lines for easy installation |
| S-02T-PF-R |
Patented DMAND Circuit Board
Pump with built in IFC valve
Flanges,
Two copper "T" compression fittings
Two stainless steel flex-lines for easy installation
One remote control package |
| S02TPFV102 |
Patented DMAND Circuit Board
Pump with built in IFC valve
Flanges,
Two copper "T" compression fittings
Two stainless steel flex-lines for easy installation
One hard-wired motion sensor |
| S-02T |
Patented DMAND Circuit Board
Pump with built in IFC valve
Flanges
One hard wired button
For dedicated return lines
No check valve is required |
|
