|
|
|
|
 |
Metlund DMAND S70T Components and Specifications |
The component parts that make up the Metlund D'MAND System are the highest quality and reproduced by the largest manufacturers in the world. The pump, controller and zone valve are the finest quality available and are designed to operate 15 to 20 years as a D'MAND System. All of the Metlund components are designed with United States technology and manufactured in the United States.
MODEL S-70T Components:
- Metlund Controller
- Taco Model 008 Pump
- PDV Valve
|
Metlund Electronic Controller (solid state)
|
Designed and developed by ACT, Inc. Metlund Systems; manufactured and quality control LED by EMS/Sandberg Industries in Santa Ana, California, a leading manufacturer of electronic circuit boards and electronic packaging. EMS/Sandberg Industries is a Fortune 500 company whose client list includes AT&T, Beckman Industries, IBM, Jet Propulsion Laboratories and NASA.
|
Taco Model 008 Cartridge Circulator
|
The more quiet direct-drive cartridge type "00" series circulator is self-lubricating, contains no mechanical seal and requires no maintenance. The unique replaceable cartridge contains all the moving parts, and allows the circulator to be serviced instead of replacing the entire unit. This compact low-power consumption design is ideal for jobs where high efficiency is necessary.
|
Taco Model 008 Pump
|
|
UL and CSA Listed
|
| Casing |
Bronze |
| Impeller |
Non-Metallic |
| Shaft |
Ceramic |
| Bearings |
Carbon |
| Connections |
Sweat 1/2" |
| Life Expectancy |
15 years |
| Performance |
Gallons/Minute=14
Total Head = 16 feet |
| Motor Type |
Permanent Split Capacitor |
| HP |
1/25 HP@ 3250 RPM |
| Electrical Charge |
.84 Amp Rating
Impedance Protected |
| Pressure Rating |
125 PSI Max |
| Temp Rating |
230º F Max |
|
PDV Valve
|
The built-in Positive D'MAND Valve (PDV) prevents thermo-siphoning and acts as a check valve.
|
Metlund DMAND S70T Kit Configurations |
|
S-70T-PF |
Patented DMAND Controller
PDV Check Valve
Two 1/2" pre-assembled threaded male adapters
Two copper "T"compression fittings
Two stainless steel flex-lines
One hard-wired button |
|
S-70T-PF-R
|
Patented DMAND Controller
PDV Check Valve
Two 1/2" pre-assembled threaded male adapters
Two copper "T"compression fittings
Two stainless steel flex-lines
One hard-wired button
One remote control package |
|
|
Patented DMAND Controller
PDV Check Valve
Two 1/2" pre-assembled threaded male adapters
Two copper "T"compression fittings
Two stainless steel flex-lines
One hard-wired button
One hard-wired motion sensor |
|
S-70T
|
S-70T with button
For dedicated return lines
Check valve is built into pump casing
For runs of up to 100 feet |
|
|
|
|
|
|
|
